Nano Tech Page 23 Review

GetFPV

READY TO FLY QAV400 (RTF)

NOTE: This build does not include Lipos and charger. We recommend either 2200mah or 3300mah 4s Nano-Tech Lipos available at HobbyKing., One of the order options includes for us to set up your FPV gear that you add to your order. To build a good FPV gear package, please consider the following components:, ImmersionRC 5.8 600mw Video TX,

Details This is a fully built QAV400 FPV Quadcopter frame. ...

GetFPV

QAV500 BRUSHLESS GIMBAL UPGRADE (PRE-ORDER)

10" Props that generate a maximum of lift. Recommended props	APC 10x4.7
Motors	We recommend the
ESCs	We recommend the

Gimbal Control Board:, We recommend the AlexMos board., Props:, Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro protection:, The QAV540G gimbal that is part of this upgrade requires the GoPro to be placed into the gimbal without the GoPro case. We recommend you buy a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

Details Turn your existing QAV500 quad into an airframe with ...

GetFPV

QAV540G BRUSHLESS GIMBAL AIRFRAME (PRE-ORDER)

Props	11" props such as
Motors	We recommend the
ESCs	We recommend the

Landing Gear:, You can choose between the, Gimbal Control Board:, We recommend the AlexMos board., Lipo:, A 5000mah 4s Lipo that is no wider than 51mm and no higher than 35mm (or it will not fit in the lipo compartment). We recommend HobbyKing Nano-Tech Lipos., GoPro Lens Protection:, The QAV540G gimbal requires the GoPro to be placed into the gimbal without the GoPro case. We recommend a separate, Shipping details:, When placing a pre-order, the entire order you place will be put on hold until the pre-ordered item is in stock and ready to ship. Please make a separate order for any additional items outside of the pre-order if you would like them to ship sooner, otherwise they will ship with your pre-order.,

Details The QAV540G is a high quality quad airframe that ...

HobbyKing

SKYFUN JET (KIT ONLY)

Wingspan	875mm
Length	700mm
Height	170mm
Motor Mount Holes	19mm or 16mm
Motor Mount Holes	19mm or 16mm
ESC	25A (Required)
Servo	2 x 9g (Required)
Prop	6 x 4 (2 included)
Motor	Turnigy 2836-2350kv
ESC	Turnigy Plush 60A
Battery	1800mAh
Prop	6x4 Sports

Specification:, Dry Weight:, 302g (No Electronics), Motor:, 28xx-1800kv Brushless Outrunner (Required), Required:, 28xx-1800kv Brushless Outrunner, Note:, For a more powerful setup try the following.,

The Skyfun can be used by novice and advanced pilots ...

5 Reviews

HobbyKing

B6-AC PLUS - CHARGER/DISCHARGER 1-6 CELLS DUAL POWER (COPY)

Input Voltage	11~18v
Circuit power	Max Charge
Charge Current Range	.1~5.0A
Discharge current range	.1~1.0A
Ni-MH/NiCd cells	1~15
Li-ion/Poly cells	1~6
Pb battery voltage	2~20v
Weight	645g
Dimensions	145x134x40mm

Note:, This kit does not include an XT-60 adapter. Please see the related item below if you use XT-60 plugs with your batteries.,

This is a copied B6-AC Plus charger. Its quality and ...

5 Reviews

HobbyKing

2 PIN JST TO 6 X E-FLIGHT ULTRA MICRO PLUG CHARGING HARNESS

2 Pin JST to 6 x E-Flight Ultra Micro charging ...

5 Reviews

HobbyKing

TURNIGY MEGA 400W V2 LITHIUM POLYMER BATTERY CHARGER (VERSION 2)

Note	Temperature sensor not included.
Input voltage	11.0 – 18.0Volt
Charge current	0.1 – 20.0A
Discharge current	0.1 – 5.0A
Maximum discharge capacity	25W
Current drain for balancing Li-po	200mAh/cell
Lithium (LiPo/LiIo/LiFe) battery cell count	1 – 6 series
NiCd/NiMH battery cell count	1 – 18 series
Pb battery voltage	2 –24V
Intelligent temperature control	Yes
Weight	815g
Dimensions	146x144x56mm

Maximum charge capacity:, 400W @ input voltage >15V, Battery setup memories:10, Note:, Power supply and temperature sensor not included.,

Take advantage of the new high C charge rate on ...

5 Reviews

HobbyKing

TURNIGY GT-10X 1/10 PAN CAR W/CARBON FIBER CHASSIS (KIT)

Length	420mm
Width	200mm
Height	115mm
Tread	170mm
Wheel base	260mm
Battery tray size	96x50mm

Features:, • Lightweight slim-line design, Specs:, Chassis weight:, 515g (w/no electronics), Includes:, GT-10X pan car chassis, Requires:, 2CH transmitter and receiver,

The all new Turnigy GT-10X 1/10 Pan Car Kit is ...

5 Reviews